With the patented Sliding Attachment Bracket you are able to slide the hoop within the bracket to move from one sewing field to the next without the need to re-hoop your fabric!

With a specially designed spacing/extension base, we S-T-R-E-T-C-H your sewing machine apart, creating a much larger sewing field. The image shown below is the Super Giant Double-Wide Hoop.

Standard Support table with Spacing/Extension Base Unit	DELUXE Support table with Spacing/Extension Base Unit

• The Double-Wide Extension base is required in order to position the embroidery unit and machine the exact distance away from one another allowing for the wider hoops. This specially designed base also ensures that the embroidery unit is properly aligned with the machine.
• Hoop-It-All first released the exciting Super Giant-L Hoop, and if you've already acquired the Super Giant-L hoop, the Standard table pictured above on the left was included with your kit. These tables are significantly smaller than the new Deluxe tables. If you decide to purchase just the new required Double-Wide Extension Base and use the standard front and back pieces from your Super Giant-L kit, the hoop will not be supported 100% and your embroidery can sew out incorrectly. We strongly recommend the Deluxe table with all Double-Wide hoops.
• With special embroidery software you can embroider designs larger than your machine's embroidery field. You can place these oversized designs anywhere you desire within the hoop frame. There are several software products available that split and slice these oversized designs into the proper size for your machine. This allows you to then embroider these designs in sections, like piecing a puzzle together. Once the embroidery is completed and all pieces are sewn, it appears as if you embroidered a huge design with your machine all at once.
• If you have both the Brother ULT machine and the Babylock Ellageo and you decide to share hoops, be very careful that you use the extension base specifically designed for your machine, otherwise you will damage your embroidery unit.
• The support tables are designed in 3 pieces so you do not have to have a workspace as large as you would if it was a single piece. When the largest hoop (Super Double-Wide) is set up, the space required on your table is 30" wide by 38" deep.

The illustrations below show how the hoops can be used on a smaller work area by changing the table pieces that we use and sliding the machine forward and back. Very little hassle for such incredible capabilities!

The back table is removed, machine slid back and the front table supports the hoop in front as you embroider the first section.	The front table is removed, machine slid forward, and the hoop is slid back within the sliding bracket. The back table supports the hoop as you embroider the second section.
The back table is removed, machine slid back, and the hoop is removed from within the sliding bracket. Both the hoop and the designs are rotated 180 degrees. The hoop is re-inserted into the sliding bracket and the front table supports the hoop as you embroider the third section.	The front table is removed, machine slid forward, and design rotated 180 degrees. The hoop is slid back within the sliding bracket and the back table supports the hoop as you embroider the final section.