 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Presser Feet for Brother Machines These presser feet fit the Brother PC6500, PC8200, PC8500/8500D, ULT models, Innovis 1000, Innovis 1500D, Innovis 2500D and Innovis 4000D. SA251
- Q Foot Price: $14.95 buy now
This foot has been designed for embroidering with ultra-fine threads. SA185 - 1/4" Quilting Foot with Guide Price: $12.95 buy now
Create perfect seams with this new 1/4" Quilting Foot with convenient fabric guide. SA184 - Edge Joining Foot Price: $12.95 buy now
The SA184 Edge Joining Foot is perfect for precise and easy joining of fabrics, even sheers and difficult fabrics. Use this foot for lining up and sewing two fabrics together to create the classic Fagoting technique or can be used to line up and sew edgings such as lace to the edge of another fabric. Great for creating garment, home decorating as well as many heirloom finishes. SA177 - Side Cutter Attachment for 7mm machines Price: $29.99 buy now
With our newly redesigned side cutter attachment, beautifully finished seams are just a foot away. The new side cutter attachment, SA177, allows you to use even the wider over-casting stitches on your machine and creates the perfectly cut edge of a serger SA175 - Zig Zag Foot with Ankle Price: $9.95 buy now
The zig zag foot with ankle set has a snap up foot for sewing over rises at the beginning of or in the body of your fabric. Simply tilt the foot and pull the button to set the foot. When a rise is encountered, the foot automatically realeases on it's downward slope. No more getting stuck at a rise or uneven stitches on the down side! This is also a great item to have on hand as a replacement for a lost or damaged ankle.
SA174 - 7 Groove Pin Tuck Foot for 7mm machines Price: $5.95 buy now
The pin tuck foot, in combination with a twin needle, helps you to make perfect pin tucks as well as to sew corded pin tucks on shirts, blouses and many home decorating projects. This accessory comes complete with bobbin cover with cord guide which fits many of the Pacesetter models. SA167 - Straight Stitch Foot Price: $9.95 buy now
The design of this foot improves contact with the feed dogs resulting in more accurate and consistant feed which creates a higher quality straight stitch. Also used for straight stitch applications using fine or lighter weight fabrics where a wide center foot opening might cause the fabric to be pulled into the bobbin area. ALWAYS USE THE CENTERED NEEDLE POSITION!!! SA164 - Picot Foot 7mm Price: $9.95 buy now
Picot foot This foot looks similar to the narrow hemmer feet, but is designed to create a shell-look edge on lightweight fabrics. The groove under the foot is thinner and deeper than the narrow hemmer feet for creating a roll at the fabric edge as the machine feeds. SA161 - Adjustable Zipper & Piping Foot Price: $9.95 buy now
Similar to the “I” foot that is included in many of our machines This foot offers more complete adjustability. The foot is adjustable to the distance that the zipper is from the needle , not just the needle position. Because of it's adjustability it is also often used in many home decoration projects such as sewing piping and other trims with a seam allowance tape making this foot a must for serious sewists. Screw on foot - requires low shank adaptor on sewing/embroidery model machines. SA160 - Stitch Guide Price $ 9.95 buy now
Stitch guide foot has a flange to the right of the foot with measurement markings to use as a fabric guide. This foot is a very helpful guide for use in sewing both utility and embellishing projects. SA158 - 7-Hole Cording Foot for horizontal up to 7mm Price $8.95 buy now
7-hole cording foot (SA158) Used for embellishing with 1-7 narrow cords. Simply thread your cords through the holes and stitch down using a serpentine zig zag or other decorative stitch. The 7 hole cording foot is fitted to our machines with 7mm feed width. Be sure that you check that this foot is usable with your machine. SA157 - 5-Hole Cording foot for horizontal up to 7mm Price: $8.95 buy now
Used for embellishing with 1-5 narrow cords. Simply thread your cords through the holes and stitch down using a serpentine zig zag or other decorative stitch. The 5 hole cording foot is fitted to our machines with 7mm feed width. SA150 - Pearl and Sequins Foot Price: $13.95 buy now
Pearls & Sequin foot is great for embellishing with threaded beads, sequins, or rounded cords up to 4 mm in size. Simply place your embellishment choice under the foot and into the guide tunnels andstitch down to your base fabric. Great for adding a little glitz with sequins or pearls as well as couching larger cords. SA149 - Picot Foot for edging on knit fabrics Price: $13.95 buy now
Picot foot This foot looks similar to the narrow hemmer feet, but is designed to create a shell-look edge on lightweight fabrics. The groove under the foot is thinner and deeper than the narrow hemmer feet for creating a roll at the fabric edge as the machine feeds. SA148 - Cording Foot (5mm) Price: $8.95 buy now
Used for embellishing with 1-3 cords. Cords or yarn are held by a clip on the top of the foot. Simply insert cords under the clip and stitch down using a serpentine zig zag or other decorative stitch. Great for couching! . Similar in use to SA157 & SA158 However, the cords are placed under a clip on the top of the foot and accomodates slightly thicker cords. Perfect for couching! SA147 - Clear Plastic Open Toe Price: $13.95 buy now
This foot is used with any application where visibility of seams, appliques, or pattern markings are desired for ease in embellishment as the foot is clear plastic. This foot is similar to SA145 except this foot has no bar in front of the needle. . SA145 - Clear View Foot Price:$8.95 buy now
The Clear-view foot can be used with any application where visibility of seams or pattern markings are desired for ease in embellishment as the foot is clear plastic. This foot is similar to SA147 except this foot has a clear bar in front of the needle. Perfect for quilting applique'! SA143 - Ruffler Foot 7mm machines Price: $29.99 buy now
Ruffle and pleat like a pro. Create beautiful ruffles and pleats in varying depths and fullness with this adjustable ruffler. The new Brother ruffler makes fast work of creating ruffles,evenly spaced tucks, and gathers for home dec pillows and curtains. You can also create great trims with purchased ribbons. Single hole needle plate makes this foot perfect for ruffling lightweight fabrics as well! SA142 - Fringe Foot Price: $12.95 buy now
The Fringe foot is a good tool for creating 3-D flowers, heirloom seam joins, surface texture and custom trims with a simple zig zag stitch. This foot was originally designed and used to to mark construction details by creating tailor tacking, so feel free to use it as a great marking too as well! SA141 - Braiding Foot up to 5mm width Price: $12.95 buy now
The adjustable guide on this foot offers perfectly centered hands free placement of cords, ribbon, braiding, or tape up to 5mm in width. SA140 - Walking Foot Price: $49.95 buy now
The walking foot is a moving feed system that holds and moves fabric between the presser foot's upper feed dog and the machines's lower feed dogs to better control difficult fabrics as well as multiple layers of fabric. The walking foot is great for quilting, sewing when matching prints or plaids or fabric drift is an issue . Brother offers several Walking feet which differ in the size of the feed dog, shank height etc. Please Please check your manual or the machine listings on this web site to find the correct walking foot to fit your machine. Walking Feet are not for use in reverse or side to side sewing as well as some built in stitches that include other than forward movement of the feed dogs. SA135 - Overlock Foot Vertical (5mm) Price: $9.95 buy now
The Overlock Foot is used for sewing overcast seams and protect edges from fraying. Use the overcast stitches in your machine and see what a difference this foot makes in their appearance and functionality! SA133 - Blind Stitch Foot Price: $9.95 buy now
Adjustable guide for creating blind hems on a variety of fabrics While designed for blind stitching, the foot works well for edge stitching, lace and fabric edge joining. This is a great tool for many embellishing as well as utility uses. SA129 - Clear Quilting Foot (Screw on Foot) Price: $19.95 buy now
Clear Quilting Foot This foot is also called a darning foot and may be used as a free motion foot. The foot raises and lowers with the needle to allow fabric to be moved between stitches and to hold fabric in place while stitches are created. (Screw on Foot). Low shank adapter is required for high shank machines. SA128 - Concealed Zipper/Fastener Foot Price: $19.95 buy now
Concealed Zipper/Fastener Foot (Snap on Foot). For easy installation of concealed zippers. SA126 - Narrow Hem (7mm) (Snap on foot) Price: $19.95 buy now
Narrow hemmer foot The unique design of this foot creates a flat narrow hem on lightweight fabrics. This foot looks similar to the picot foot from the top. However the groove under the foot is slightly wider and flatter to form and to create a beautiful narrow hem. Start sewing with a length of thread extended from the back. Stop, pull a piece of the top edge of the fabric through the turned part fo the foot and use the lenght of thread to grip as you start to sew and need to guide the thread through the foot. SA125 - 1/4" Quilting Foot Price: $7.95 buy now
For quilt and patchwork piecing with 1/4" or 1/8" seam allowances. Using the center needle, straight stitch position, the right front edge of this foot provides a guide for creating even ¼-inch seams for quilts, doll clothes and heirloom sewing projects. When using the left side of the foot as a guide, an 1/8-inch seam is created. SA114 - Non-Stick Foot Price:$12.95 buy now
This non-stick foot glides over difficult fabric surfaces with ease, while improving stitch quality in many problem fabrics. Some fabrics may bind under metal feet often causing problems with a consistant feed resulting in poor stitch quality. The non stick foot overcomes problems with fabric such as loop and hook tapes, leather, and vinyl. Perfect for hemming plastic tablecloths! SA110 - Cording Foot (7mm) Price: $8.95 buy now
Used for embellishing with 1-3 cords. Cords or yarn are held by a clip on the top of the foot. Simply insert cords under the clip and stitch down using a serpentine zig zag or other decorative stitch. Great for couching! . Similar in use to SA157 & SA158 However, the cords are placed under a clip on the top of the foot and accomodates slightly thicker cords. Perfect for couching! SA109 - Binder Foot Price: $12.95 buy now
Binder foot (SA109) Used to attach bias tape less than 7mm (finished) in width. The design of this foot places your ready made bias tape or will fold and place precut bias strips correctly for easy sewing to the edge of a fabric. SA108 - Straight Stitch Price: 9.95 buy now
The design of this foot improves contact with the feed dogs resulting in more accurate and consistant feed which creates a higher quality straight stitch. Also used for straight stitch applications using fine or lighter weight fabrics where a wide center foot opening might cause the fabric to be pulled into the bobbin area. These feet fit the Brother CS series, NX series, C2800, PC3000, PC6000, 400D, 500D and 270D
SA185 - 1/4" Quilting Foot with Guide Price: $12.95 buy now
Create perfect seams with this new 1/4" Quilting Foot with convenient fabric guide. SA184 - Edge Joining Foot Price: $12.95 buy now
The SA184 Edge Joining Foot is perfect for precise and easy joining of fabrics, even sheers and difficult fabrics. Use this foot for lining up and sewing two fabrics together to create the classic Fagoting technique or can be used to line up and sew edgings such as lace to the edge of another fabric. Great for creating garment, home decorating as well as many heirloom finishes. SA177 - Side Cutter Attachment for 7mm machines Price: $29.99 buy now
With our newly redesigned side cutter attachment, beautifully finished seams are just a foot away. The new side cutter attachment, SA177, allows you to use even the wider over-casting stitches on your machine and creates the perfectly cut edge of a serger SA167 - Straight Stitch Foot Price: $9.95 buy now
The design of this foot improves contact with the feed dogs resulting in more accurate and consistant feed which creates a higher quality straight stitch. Also used for straight stitch applications using fine or lighter weight fabrics where a wide center foot opening might cause the fabric to be pulled into the bobbin area. ALWAYS USE THE CENTERED NEEDLE POSITION!!! SA164 - Picot Foot 7mm Price: $9.95 buy now
Picot foot This foot looks similar to the narrow hemmer feet, but is designed to create a shell-look edge on lightweight fabrics. The groove under the foot is thinner and deeper than the narrow hemmer feet for creating a roll at the fabric edge as the machine feeds. SA161 - Adjustable Zipper & Piping Foot Price: $9.95 buy now
Similar to the “I” foot that is included in many of our machines This foot offers more complete adjustability. The foot is adjustable to the distance that the zipper is from the needle , not just the needle position. Because of it's adjustability it is also often used in many home decoration projects such as sewing piping and other trims with a seam allowance tape making this foot a must for serious sewists. Screw on foot - requires low shank adaptor on sewing/embroidery model machines. SA160 - Stitch Guide Price: $9.95 buy now
Stitch guide foot has a flange to the right of the foot with measurement markings to use as a fabric guide. This foot is a very helpful guide for use in sewing both utility and embellishing projects. SA158 - 7-Hole Cording Foot for horizontal up to 7mm Price: $8.95 buy now
7-hole cording foot (SA158) Used for embellishing with 1-7 narrow cords. Simply thread your cords through the holes and stitch down using a serpentine zig zag or other decorative stitch. The 7 hole cording foot is fitted to our machines with 7mm feed width. Be sure that you check that this foot is usable with your machine. SA157 - 5-Hole Cording foot for horizontal up to 7mm Price: $8.95 buy now
Used for embellishing with 1-5 narrow cords. Simply thread your cords through the holes and stitch down using a serpentine zig zag or other decorative stitch. The 5 hole cording foot is fitted to our machines with 7mm feed width. SA150 - Pearl and Sequins Foot Price: $13.95 buy now
Pearls & Sequin foot is great for embellishing with threaded beads, sequins, or rounded cords up to 4 mm in size. Simply place your embellishment choice under the foot and into the guide tunnels andstitch down to your base fabric. Great for adding a little glitz with sequins or pearls as well as couching larger cords SA148 - Cording Foot (5mm) Price: $8.95 buy now
Used for embellishing with 1-3 cords. Cords or yarn are held by a clip on the top of the foot. Simply insert cords under the clip and stitch down using a serpentine zig zag or other decorative stitch. Great for couching! . Similar in use to SA157 & SA158 However, the cords are placed under a clip on the top of the foot and accomodates slightly thicker cords. Perfect for couching! SA145 - Clear View Foot Price: $8.95 buy now
The Clear-view foot can be used with any application where visibility of seams or pattern markings are desired for ease in embellishment as the foot is clear plastic. This foot is similar to SA147 except this foot has a clear bar in front of the needle. Perfect for quilting applique'! SA141 - Braiding Foot up to 5mm width Price: $12.95 buy now
The adjustable guide on this foot offers perfectly centered hands free placement of cords, ribbon, braiding, or tape up to 5mm in width. SA140 - Walking Foot Price: $49.95 buy now
The walking foot is a moving feed system that holds and moves fabric between the presser foot's upper feed dog and the machines's lower feed dogs to better control difficult fabrics as well as multiple layers of fabric. The walking foot is great for quilting, sewing when matching prints or plaids or fabric drift is an issue . Brother offers several Walking feet which differ in the size of the feed dog, shank height etc. Please Please check your manual or the machine listings on this web site to find the correct walking foot to fit your machine. Walking Feet are not for use in reverse or side to side sewing as well as some built in stitches that include other than forward movement of the feed dogs. SA135 - Overlock Foot Vertical (5mm) Price: $9.95 buy now
The Overlock Foot is used for sewing overcast seams and protect edges from fraying. Use the overcast stitches in your machine and see what a difference this foot makes in their appearance and functionality! SA133 - Blind Stitch Foot Price: $9.95 buy now
Adjustable guide for creating blind hems on a variety of fabrics While designed for blind stitching, the foot works well for edge stitching, lace and fabric edge joining. This is a great tool for many embellishing as well as utility uses. SA129 - Clear Quilting Foot (Screw on Foot) Price: $19.95 buy now
Clear Quilting Foot This foot is also called a darning foot and may be used as a free motion foot. The foot raises and lowers with the needle to allow fabric to be moved between stitches and to hold fabric in place while stitches are created. (Screw on Foot). Low shank adapter is required for high shank machines. SA128 - Concealed Zipper/Fastener Foot Price: $19.95 buy now
Concealed Zipper/Fastener Foot (Snap on Foot). For easy installation of concealed zippers. SA126 - Narrow Hem (7mm) (Snap on foot) Price: $19.95 buy now
Narrow hemmer foot The unique design of this foot creates a flat narrow hem on lightweight fabrics. This foot looks similar to the picot foot from the top. However the groove under the foot is slightly wider and flatter to form and to create a beautiful narrow hem. Start sewing with a length of thread extended from the back. Stop, pull a piece of the top edge of the fabric through the turned part fo the foot and use the lenght of thread to grip as you start to sew and need to guide the thread through the foot. SA125 - 1/4" Quilting Foot Price: $7.95 buy now
For quilt and patchwork piecing with 1/4" or 1/8" seam allowances. Using the center needle, straight stitch position, the right front edge of this foot provides a guide for creating even ¼-inch seams for quilts, doll clothes and heirloom sewing projects. When using the left side of the foot as a guide, an 1/8-inch seam is created. SA114 - Non-Stick Foot Price: $12.95 buy now
This non-stick foot glides over difficult fabric surfaces with ease, while improving stitch quality in many problem fabrics. Some fabrics may bind under metal feet often causing problems with a consistant feed resulting in poor stitch quality. The non stick foot overcomes problems with fabric such as loop and hook tapes, leather, and vinyl. Perfect for hemming plastic tablecloths! SA110 - Cording Foot (7mm) Price: $8.95 buy now
Used for embellishing with 1-3 cords. Cords or yarn are held by a clip on the top of the foot. Simply insert cords under the clip and stitch down using a serpentine zig zag or other decorative stitch. Great for couching! . Similar in use to SA157 & SA158 However, the cords are placed under a clip on the top of the foot and accomodates slightly thicker cords. Perfect for couching! SA109 - Binder Foot Price: 12.95 buy now
Binder foot (SA109) Used to attach bias tape less than 7mm (finished) in width. The design of this foot places your ready made bias tape or will fold and place precut bias strips correctly for easy sewing to the edge of a fabric. SA108 - Straight Stitch Price: $9.95 buy now
The design of this foot improves contact with the feed dogs resulting in more accurate and consistant feed which creates a higher quality straight stitch. Also used for straight stitch applications using fine or lighter weight fabrics where a wide center foot opening might cause the fabric to be pulled into the bobbin area.
|
 |
 |
 |
 |
 |
